Showing posts with label kilts. Show all posts
Showing posts with label kilts. Show all posts
Thursday, January 28, 2010
Thursday, January 29, 2009
Design and construction part3
Measurements
Although low quality kilts can be obtained in standard sizes, a quality kilt is tailored to the individual proportions of the wearer. At least three measurements, the waist, hips, and length of the kilt, are usually required. Sometimes the rise (distance above the waist) or the fall (distance from waistline to the widest part of the hips) is also required.
Stitching on the fell of a kilt
A properly made kilt, when buckled on the tightest holes of the straps, should not be so loose that the wearer can easily twist the kilt around the body, nor should it be so tight that it causes "scalloping" of the fabric where it is buckled.
Additionally, the length of the kilt when buckled at the waist should reach a point no lower than halfway across the kneecap nor higher than about an inch above it.
Although low quality kilts can be obtained in standard sizes, a quality kilt is tailored to the individual proportions of the wearer. At least three measurements, the waist, hips, and length of the kilt, are usually required. Sometimes the rise (distance above the waist) or the fall (distance from waistline to the widest part of the hips) is also required.
Stitching on the fell of a kilt
A properly made kilt, when buckled on the tightest holes of the straps, should not be so loose that the wearer can easily twist the kilt around the body, nor should it be so tight that it causes "scalloping" of the fabric where it is buckled.
Additionally, the length of the kilt when buckled at the waist should reach a point no lower than halfway across the kneecap nor higher than about an inch above it.
The Scottish kilt
The Scottish kilt displays uniqueness of design, construction, and convention which differentiate it from other garments fitting the general description. It is a tailored garment that is wrapped around the wearer's body at the natural waist (between the lowest rib and the hip) starting from one side (usually the wearer's left), around the front and back and across the front again to the opposite side. The fastenings consist of straps and buckles on both ends, the strap on the inside end usually passing through a slit in the waistband to be buckled on the outside; alternatively it may remain inside the waistband and be buckled inside.
The kilt covers the body from the waist down to just above the knees. The overlapping layers in front are called "aprons" and are flat; the single layer of fabric around the sides and back is pleated. A kilt pin is fastened to the front apron on the free corner (but is not passed through the layer below). Underwear may or may not be worn, as the wearer prefers but in some circumstances underwear is prohibited by military regulations[citation needed].
Organizations that sanction and grade the competitions in Highland dancing and bagpiping all have rules governing acceptable attire for the competitors. These rules specify that the kilt is to be worn (except that in the national dances, the female competitors will be wearing the Aboyne dress)
The kilt covers the body from the waist down to just above the knees. The overlapping layers in front are called "aprons" and are flat; the single layer of fabric around the sides and back is pleated. A kilt pin is fastened to the front apron on the free corner (but is not passed through the layer below). Underwear may or may not be worn, as the wearer prefers but in some circumstances underwear is prohibited by military regulations[citation needed].
Organizations that sanction and grade the competitions in Highland dancing and bagpiping all have rules governing acceptable attire for the competitors. These rules specify that the kilt is to be worn (except that in the national dances, the female competitors will be wearing the Aboyne dress)
Subscribe to:
Posts (Atom)